So konfigurieren Sie die VPN-Verbindung für Windows 10 mit dem L2TP/IPSec. Trust.Zone VPN Handbuch

Schritt 1

Right click on the network icon in the system tray and then click "Open Network and Sharing Center".

Schritt 2

Click "Set up a new connection or network".

Schritt 3

Select "Connect to a workplace" and click "Next".

Schritt 4

Click on "Use my Internet connection (VPN)".

Schritt 5

Fill form with values shown below. Check "Remember my credentials" and click on "Create".

Internet address: vpn.trust.zone
Destination name: Trust.Zone-VPN

vpn.trust.zone Trust.Zone-VPN

Schritt 6

Open the Network and Sharing Center and click on "Change adapter settings".

Schritt 7

Click with right on the VPN network adapter and then click on "Properties".

Trust.Zone-VPN

Schritt 8

Switch to the tab "Security", select Type of VPN "Layer 2 Tunneling Protocol with IPsec (L2TP/IPsec)" and take over the settings from the screenshot. Then click on "Advanced settings".

Schritt 9

Set "Use preshared key for authentication", it is: trustzone

Trust.Zone-VPN trustzone

Schritt 10

Click on the network icon in the taskbar, select the VPN connection and click on "Connect".

Trust.Zone-VPN

Schritt 11

Enter your VPN login credentials and click on "OK".

Username: VERSTECKTE. Melden Sie sich an oder loggen Sie sich ein, um zu sehen.
Password: VERSTECKTE. Melden Sie sich an oder loggen Sie sich ein, um zu sehen.

Schritt 12

If connection has been successfully established, it displays "Connected". You can manage your VPN connection in the network settings.

Trust.Zone-VPN

Connection check

Open Trust.Zone Main page or reload it if it is already open in order to check if your connection with Trust.Zone VPN is established correctly.
You can also visit our Connection Check Page.

Deine IP: x.x.x.x · Großbritannien · Sie sind jetzt in TRUST.ZONE! Ihr wirklicher Standort ist versteckt!